Products


Aerosol Filling Machine

Your Position: Home > Products > Aerosol Filling Machine

Cooking Gas Filling Line

Brief Introduction:

1.Feeding line:
Stainless steel main panel and side panel, 2440×3 sections; speed variaor adopts scope of speed: 5-25r/min.; 1.1kw anti-blast motor and anti-blast switch are attached;2.5mm thickness 304 stainless steel plate is used. The anti-blast motor is from China.
2. Capping and inflating device:
Equipped with a vacuum head, a capping head, 3 inflating heads, 2 booster pumps, a set of aerosol can star wheel and can guidance panel; full pneumatic control with main pneumatic control devices from Japan. Both capping head and inflating heads are equipped with guiding devices..
3. Control System:
Capping and inflating device are under pneumatic control.
6.Safety Devices:
Anti-blast motors are applied for can clean-up device and the feeding line; the circuit is through PVC pipes and anti-blast junction boxes, connected by anti-blast switch; the main machine does NOT require power supply; the casing is earthing to prevent electrostatic; inflating device are protected by cabinet (stainless steel frame with 4mm transparent organic glass) .
7.Galvanized pipe joints are threaded or coarse thread.
 
 
 

Working Process

Manual Can Feeding     Empty Can Conveying System    Manual Valve Insertion     Crimping & Gassing System     Conveyor     Next Station

 
Features

1. Sealing guided,automatically stop on unqualified sealing;
2. Accurate & efficient gas inflation reduces gas consumption;
3. Can be perfectly matched with automatic water bath leakage detection machine, automatic check weighing machine,automatic actuator placing machine, capping machine and ink jet printer.
 

 
Parameter:

 
Nos.
Technical parameter
1
Filling capacity
50-750ml (can be customized)
2
Filling accuracy
≤±1%
3
Capping accuracy
≤±1%
4
Production capacity
2400-3600 cans/hr
5
Air source
0.65Mpa-1Mpa 
6
Max air consumption
3 M³/min
7
Can Height
80~330
8
Can Diameter
Φ35~Φ80
9
Valve Requirement
1”  international standard valve
10
Weight
about 2000kg
11
Dimension(L×W×H)
20000×1500×2100

看不清?点击更换